With the increasing need for food and reduction in arable pieces of land, the use of irrigation farming is increasing. We have many types of irrigation systems available depending on need and budget of the farmer. Among these is pulse irrigation.
This system makes it possible to effectively manage your water resources. Since it is scalable, one can set it whatever way desired for the minimal water usage. Used with a drip or sprinkler system, the irrigation will be well managed. It can also be used together with the usual low flow systems and the ultra low flow systems.
This is an irrigation system mostly used in areas where water is very scarce like in desert countries including Israel. It works by passively allowing water to flow at a controlled rate into a reservoir so as to build pressure in the reservoir at a steady rate. On reaching a predetermined pressure level, the valves from the reservoir open forcing a pulse of water out.
As the reservoir pressure reduces, the valves close giving the reservoir time to recharge. As long as the inlet is kept lower than outlet, the cycle of recharge and discharge will be kept going. A drip flow controller is used in this system to regulate the water flow rate into the reservoir.
This low flow pulse system can operate without monitoring for a long period of time. This saves the farmer from overwatering the plants. Engaging in this constant, frequent and controlled irrigation reduces water demand and lowers usage by a large margin. It also reduces water stress on plants as they have a period when there is no water flow as the pressure builds in the reservoir.
Basically, this system operates by the strong magnets that attaches to the outlet valve. These holds it closed as the pressure builds. When it is strong enough, the reservoir pressure forces the top magnets open. As the pressure reduces, it drops down thereby closing the valve again allowing the recharging to start.
Using this on a sprinkler system is very effective for open farming. When seeds are germinating, one can use a frequency of 5 second sprinkling every minute for the first 2 weeks. This can then be adjusted to 8 hours sprinkling three times a week. This frequency is determined by plant water need, weather condition and the strength of the sun in that season.
Pulse irrigation system has been proven to have many advantages in farming. Even when used with a drip or sprinkler system, you get no run offs on heavy soil. Used on sandy soil that is known to have poor water retention, there is no leaching or water loss. On hilly areas and shallow soil, water does not run off despite the terrain. One can also achieve temperature control effectively through evaporative cooling using foggers and sprinklers working intermittently. This low discharge rate allows for use of little space in greenhouse and smaller containers. The system installation costs are also lowered greatly since it requires low capacity water pumps and smaller conduits.
This system makes it possible to effectively manage your water resources. Since it is scalable, one can set it whatever way desired for the minimal water usage. Used with a drip or sprinkler system, the irrigation will be well managed. It can also be used together with the usual low flow systems and the ultra low flow systems.
This is an irrigation system mostly used in areas where water is very scarce like in desert countries including Israel. It works by passively allowing water to flow at a controlled rate into a reservoir so as to build pressure in the reservoir at a steady rate. On reaching a predetermined pressure level, the valves from the reservoir open forcing a pulse of water out.
As the reservoir pressure reduces, the valves close giving the reservoir time to recharge. As long as the inlet is kept lower than outlet, the cycle of recharge and discharge will be kept going. A drip flow controller is used in this system to regulate the water flow rate into the reservoir.
This low flow pulse system can operate without monitoring for a long period of time. This saves the farmer from overwatering the plants. Engaging in this constant, frequent and controlled irrigation reduces water demand and lowers usage by a large margin. It also reduces water stress on plants as they have a period when there is no water flow as the pressure builds in the reservoir.
Basically, this system operates by the strong magnets that attaches to the outlet valve. These holds it closed as the pressure builds. When it is strong enough, the reservoir pressure forces the top magnets open. As the pressure reduces, it drops down thereby closing the valve again allowing the recharging to start.
Using this on a sprinkler system is very effective for open farming. When seeds are germinating, one can use a frequency of 5 second sprinkling every minute for the first 2 weeks. This can then be adjusted to 8 hours sprinkling three times a week. This frequency is determined by plant water need, weather condition and the strength of the sun in that season.
Pulse irrigation system has been proven to have many advantages in farming. Even when used with a drip or sprinkler system, you get no run offs on heavy soil. Used on sandy soil that is known to have poor water retention, there is no leaching or water loss. On hilly areas and shallow soil, water does not run off despite the terrain. One can also achieve temperature control effectively through evaporative cooling using foggers and sprinklers working intermittently. This low discharge rate allows for use of little space in greenhouse and smaller containers. The system installation costs are also lowered greatly since it requires low capacity water pumps and smaller conduits.
Comments
Post a Comment